Mazda 626

1991-1998 of release

Repair and car operation

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
- 8. Coupling and semi-axes
   8.1. Introduction
   8.2. Technical characteristics
   - 8.3. Coupling
      8.3.1. Cylinders of a drive of switching off of coupling
      8.3.2. Hydraulic system of a drive of switching off of coupling
      8.3.3. Elements of the mechanism of coupling
      8.3.4. Vyzhimna bearing and fork of the vyzhimny bearing
      8.3.5. Adjustment of a pedal of coupling
      8.3.6. Blocking switch
   + 8.4. Semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice

8.3.4. Vyzhimna bearing and fork of the vyzhimny bearing


1. Remove the working cylinder of a drive of switching off of coupling.
2. Remove a transmission.
3. Remove a bearing fork from a spherical support, press on a spring and remove vyzhimny the bearing together with a fork.


1. Try to rotate an internal path of the bearing, having pressed on it. Replace the bearing if it is necessary.
2. Examine vyzhimny the lever on existence of cracks or deformation.


1. Fill an internal flute of the vyzhimny bearing with high-temperature greasing. Also grease shlitsa of an entrance shaft, a spherical support and bearing fastening.
2. Grease with high-temperature greasing a nest on the lever and the ends of a fork of the vyzhimny bearing, establish the bearing on a fork.
3. Establish the bearing on a shaft and establish a bearing fork on a spherical support.
4. Further installation is carried out upside-down removals.