Mazda 626
+ 1. Maintenance instruction
- 2. Maintenance
2.1. Technical characteristics
2.2. Schedule of maintenance of Ford Probe, Mazda 626 and MX-6
2.3. Primary and secondary checks
2.4. Check of level of oil and liquids
2.5. Check of a condition of tires and pressure in tires
2.6. Check of level of liquid of system of hydrostrengthening of a steering
2.7. Check of level of AKPP liquid
2.8. Replacement of engine oil and oil filter
2.9. Check of seat belts
2.10. Survey and replacement of brushes of screen wipers
2.11. Check, maintenance and battery charging
2.12. Check, adjustment of a tension and replacement of a driving belt
2.13. Check and replacement of hoses in an impellent compartment
2.14. Check of system of cooling
2.15. Shift of wheels
2.16. Check of brake system
2.17. Check of level of oil of a mechanical transmission
2.18. Replacement of the air filter
2.19. Check and replacement of spark plugs
2.20. Check and replacement of elements of system of ignition
2.21. Check and replacement of the valve of ventilation of a case
2.22. Check and adjustment of speed of idling (model till 1997 of century)
2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997 of century)
2.24. Replacement of cooling liquid and washing of system of cooling
2.25. Replacement of brake liquid
2.26. Steering and suspension bracket check
2.27. AKPP liquid replacement
2.28. Replacement of oil of a mechanical transmission
2.29. Check of an exhaust system
2.30. Power supply system check
2.31. Check and adjustment of gaps of valves (model of 1998 of release)
2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice
|
Recommended lubricants and liquids
| Engine oil: |
| – type | All-weather API SJ engine oil |
| – viscosity | 5W-30 |
| Liquid of an automatic transmission | Liquid of an automatic transmission of Mercon III |
| Oil of a mechanical transmission | Transmission SAE 75W/90 oil |
| Type of brake liquid | DOT3 |
| Liquid of system of hydrostrengthening of a steering | Liquid of an automatic transmission of Mercon III |
| Fuel type | Unleaded gasoline with octane number 87 or above |
Quantities
| Engine oil, with filter replacement: |
| – six-cylinder engine |
3,9 l
|
| – four-cylinder engine |
3,5 l
|
| Automatic transmission: |
| – models with the four-cylinder engine |
5,6 l
|
| – models with the six-cylinder engine |
6,8 l
|
| – mechanical transmission |
2,7 l
|
| Cooling liquid: |
| – models with the six-cylinder engine |
7,4 l
|
| – models with the four-cylinder engine |
7,0 l
|
| Ignition system |
| Type of spark plugs: |
| – models with the four-cylinder engine |
NGK BKR5E-11 or Motorcraft AGSP 32C
|
| – models with the six-cylinder engine: |
| • 1993-1997 |
NGK ZFR5F-11 or Motorcraft AGSP 32C
|
| • 1998 |
Nippondenso PKJ16CR8
|
| Spark gap: |
| – all models, except models of 1998 of release with the six-cylinder engine |
0,975-1,075 mm
|
| – models of 1998 of release with the six-cylinder engine |
0,700-0,775 mm
|
| Resistance of wires of a high voltage |
16 kiloohms on 100 cm of length of a wire
|
| Operating procedure of cylinders: |
| – four-cylinder engine |
1–3–4–2
|
| – six-cylinder engine |
1–2–3–4–5–6
|
| Corner of an advancing of ignition (plugs of the diagnostic socket of connection of GND and TEN are connected): |
| – models with the four-cylinder engine |
11-13 ° to VMT
|
| – models with the six-cylinder engine |
9–11 ° to VMT
|
| Cooling system |
| Thermostat: |
| – the thermostat starts to open |
80-84 ° With
|
| – the thermostat is completely open |
95 ° With
|
| Deviation of a driving belt |
| Six-cylinder engine: |
| – pump of system of hydrostrengthening of a steering: |
| • new belt |
6–7 mm
|
| • old belt |
7–8 mm
|
| – generator: |
| • new belt |
6–7 mm
|
| • old belt |
7–8 mm
|
| Four-cylinder engine: |
| – pump of system of hydrostrengthening of a steering: |
| • new belt |
8–12,5 mm
|
| • old belt |
12,5-15,5 mm
|
Generator
| Models without the conditioner: |
| – new belt |
8–9 mm
|
| – old belt |
11-12,5 mm
|
| Models with the conditioner: |
| – new belt |
4,5-6 mm
|
| – old belt |
8–9 mm
|
| Brake system: |
| – minimum admissible thickness of a frictional material of brake slips |
1,5 mm
|
| – minimum admissible thickness of a frictional material of brake shoes |
1,5 mm
|
| Adjustment of the hand brake: |
| – models with back drum-type brakes |
4–7 clicks
|
| – models with back disk brakes |
6–9 clicks
|
| Speed of idling: |
| – 1993-1995 |
0,975-1,075 mm
|
| – 1996 and 1997: |
| • models with the four-cylinder engine |
650-750 rpm
|
| • models with the six-cylinder engine |
600-700 rpm
|
| – 1998 |
Is not subject to adjustment
|
| Gaps of the klapanny mechanism (engine cold) (only models of 1998 of release): |
| – models with the four-cylinder engine (inlet and final valves) |
0,225-0,3 mm
|
| – models with the six-cylinder engine: |
| • inlet valves |
0,25-0,3 mm
|
| • final valves |
0,275-0,325 mm
|
Moments of an inhaling, N of m.
| Cap of a drain opening of engine oil |
30-40
|
| Automatic transmission: |
| – drain cap |
16,2-28,4
|
| – fixing bolts of the pallet |
8–10
|
| Mechanical transmission: |
| – cap of a jellied opening |
45
|
| – cap of a drain opening |
39
|
| – spark plugs |
17,5
|
| – fixing nuts of wheels |
88-118
|
Table of viscosity of engine oils
|
1. Hot weather
2. Cold weather
|
3. Such badges should be present on packing of your engine oil |
For bigger economy of fuel and simplification of cold start of the engine use oil with smaller viscosity for this temperature range.
Scheme of an arrangement of cylinders and identification of wires of the distributor or ignition coil
|
1. 6-cylinder engine
2. Forward
|
3. 4-cylinder engine |
|
|