Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   + 10.3. Suspension brackets
   + 10.4. Steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


домофонні системи

10. Running gear

10.1. Introduction

GENERAL INFORMATION

The forward suspension bracket is completely independent and uses MacPherson racks. The stabilizer of cross-section stability is established on all models.

Elements of a forward suspension bracket and steering

 
1. Steering mechanism
2. Suspension bracket lever
3. Sharovy hinge
4. Nave arm
5. Suspension bracket rack
6. Guard

The back suspension bracket also uses racks of MacPherson and includes cross-section and longitudinal levers of a suspension bracket.

Elements of a back suspension bracket (bottom view)

 
1. Suspension bracket rack
2. Back cross-section lever
3. Nave arm
4. Longitudinal lever
5. Forward cross-section lever
6. Cross-piece
7. Stabilizer of cross-section stability

On all models the stabilizer of cross-section stability of a back suspension bracket is also established.

Elements of a back suspension bracket (rear view)

 
1. Suspension bracket rack
2. Connecting draft of the stabilizer of cross-section stability
3. Cross-piece
4. Adjusting cam
5. Stabilizer of cross-section stability
6. Back cross-section lever
7. Forward cross-section lever
8. Nave arm
9. Longitudinal lever

The Reechny steering mechanism is located behind an engine / transmission and fastens to a suspension bracket cross-piece. The system of hydrostrengthening of a steering consists of the steering mechanism, the pump and connecting tubes and hoses.