Mazda 626

1991-1998 of release

Repair and car operation

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   + 10.3. Suspension brackets
   - 10.4. Steering
      10.4.1. Steering wheel
      10.4.2. Steering column
      10.4.3. Tips of steering drafts
      10.4.4. Replacement of covers of the steering mechanism
      10.4.5. Steering mechanism
      10.4.6. Pump of system of hydrostrengthening of a steering
      10.4.7. Pumping of system of hydrostrengthening of a steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice

Как убрать штукатурку

10.4. Steering

10.4.1. Steering wheel

Removal

PERFORMANCE ORDER

1. Establish forward wheels directly.
2. Disconnect the accumulator and wait some minutes before continuing.
	3. Turn off fixing bolts of the module of an airbag of safety.
4. Disconnect connection sockets behind the module.
	5. Remove the module of an airbag of safety from a steering wheel.
	6. Turn off a fixing nut of a steering wheel and mark the provision of installation of a steering wheel on a shaft of a steering column.
	7. By means of a stripper remove a steering wheel.
	8. Fix the provision of a spring and a casing by means of a sticky tape.

Installation

Installation is carried out upside-down removals. If the screw spring was shifted, turn it clockwise against the stop, then turn a spring counter-clockwise on 2–3/4 turns so that the arrow on a spring specified up.