Mazda 626
+ 1. Maintenance instruction + 2. Maintenance + 3. Engines + 4. Heating and ventilation + 5. Fuel system + 6. Exhaust system + 7. Transmissions + 8. Coupling and semi-axes + 9. Brake system - 10. Running gear 10.1. Introduction 10.2. Technical characteristics - 10.3. Suspension brackets - 10.3.1. Rack of a forward suspension bracket 10.3.1.1. Replacement of elements of a rack of a suspension bracket 10.3.1.2. Nave arm 10.3.1.3. Nave and bearing of a nave of a forward wheel 10.3.1.4. Stabilizer of cross-section stability of a forward suspension bracket 10.3.1.5. Suspension bracket lever 10.3.1.6. Replacement of spherical hinges + 10.3.2. Rack of a back suspension bracket 10.3.3. Size of tires 10.3.4. Corners of installation of wheels + 10.4. Steering + 11. Body + 12. Electric equipment + 13. Electroschemes + 14. Good advice
|
Removal
PERFORMANCE ORDER |
1. Remove a wheel. |
|
2. Remove a brake hose from an arm on a suspension bracket rack. Remove an ABS sensor wire. |
3. Turn off fixing nuts of an arm of a nave and remove fixing bolts. |
4. Remove a nave arm from a rack. |
|
5. Mark the provision of installation of a rack, turn off fixing nuts and remove a rack. |
|
Check
PERFORMANCE ORDER |
1. Examine a rack on existence of traces of leak, dents, cracks or others damages. |
2. Examine shock-absorbers on existence of cracks or damages. Check condition of saddles of a spring. |
|
Installation
Installation is carried out upside-down removals. |
|